Ohmega-Ply®, manufactured by Ohmega Technologies, Inc. and TCR®, manufactured by Ticer Technologies, LLC, are thin film resistor-conductor materials. Using standard subtractive printed circuit technology, integral resistors are formed on circuit layers. These resistors can be buried within a multilayer circuit board or used on the board surface.
Specifications
Minimum Footprint: 4 x 6 mils
Standard Tolerance: ± 15%
Advanced Tolerance: ± 10%
Laser Trimming Available: ± 1%
Ohms/Square Available: 10, 25, 50, 100, 250
RC Network
Shown is one of 6 inner layers of buried resistor and interdigital capacitor
design in a 17-layer Rigid Flex.
Trace Width: 0.002 +/- 0.0003”
Capacitor Feature Spacing: 0.002 +/- 0.0003”
Resistors On Flex
Layers: 2
Material: DuPont AP8535 Flex Material
Ohmega-Ply: 100 ohm/sq Resistor Material
Resistor: 10,000 +/- 1000 ohms
Laser Trimmed Resistor
Shown is an inner layer (50 ohm/sq) resistor, laser trimmed to 200 ohms +/- 1%.